Pada artikel kali ini kita bahas mengenai konfigurasi Webproxy, NAT, Load balancing dan IPS pada Vyatta 5.0.2. Skenario-nya dapat di lihat pada gambar di bawah ini:
| Device | eth0 | eth1 | eth2 | eth3 | Keterangan |
| V0 | 192.168.5.5/30 | 192.168.1.1/24 | 192.168.2.1/24 | 192.168.3.1/24 | DHCP, Webproxy |
| V1 | 122.124.193.196/27 | 192.168.5.6/30 | 116.98.176.210/29 | NAT, Load balancing, IPS | |
| R0 | 116.98.176.209/29 | ||||
| R1 | 122.124.193.193/27 | ||||
| DNS | 122.124.193.195/27 | ||||
| WEB | 122.124.193.204/27 |
Skenario dari topology di atas, user yang akses dari network 192.168.1.0/24(lan-1), 192.168.2.0/24(lan-2) dan 192.168.3.0/24(lan-3) memperoleh ip dari dhcp server(Vyatta V0) dalam jangkauan .51 s/d .200, default gateway .1.1(lan-1) / .2.1(lan-2) / .3.1(lan-3) dan primary dns 122.124.193.195. Agar penggunaan bandwidth lebih efektif maka dipasang aplikasi webproxy pada Vyatta V0 untuk jaringan lan tersebut.
Untuk akses ke Internet digunakan dua saluran ISP, untuk itu perlu diaktifkan load balancing pada V1 dengan ip monitoring 216.204.61.104 (www.google.com). Jika koneksi eth0 dan eth1 Vyatta V1 sukses menuju ip monitoring, maka saluran koneksi akan menggunakan ISP1 dan ISP2 secara bergantian(per session). Jika salah satu gagal maka hanya ada satu saluran saja yang akan digunakan yaitu saluran koneksi yang sukses menuju ke ip monitoring.
Jika jaringan lan-1, lan-2 dan lan-3 mengakses server DNS/WEB yang terletak dalam domainnya, maka tidak akan dilakukan load balance, akses akan dilewatkan pada jalur eth0 Vyatta V1.
Konfigurasi router Vyatta V0 dan V1 untuk kasus di atas sebagai berikut:
Vyatta router V0:
vyatta@vyatta:~$ configure
vyatta@vyatta# set system name-server 122.124.193.195
vyatta@vyatta# set system gateway-address 192.168.5.6
vyatta@vyatta# commit
vyatta@vyatta# set interfaces ethernet eth0 address 192.168.5.5/30
vyatta@vyatta# set interfaces ethernet eth1 address 192.168.1.1/24
vyatta@vyatta# set interfaces ethernet eth2 address 192.168.2.1/24
vyatta@vyatta# set interfaces ethernet eth3 address 192.168.3.1/24
vyatta@vyatta# commit
vyatta@vyatta# set service dhcp-server shared-network-name lan1
vyatta@vyatta# set service dhcp-server shared-network-name lan1 subnet 192.168.1.0/24
vyatta@vyatta# set service dhcp-server shared-network-name lan1 subnet 192.168.1.0/24 start 192.168.1.51 stop 192.168.1.200
vyatta@vyatta# set service dhcp-server shared-network-name lan1 subnet 192.168.1.0/24 default-router 192.168.1.1
vyatta@vyatta# set service dhcp-server shared-network-name lan1 subnet 192.168.1.0/24 dns-server 122.124.193.195
vyatta@vyatta# set service dhcp-server shared-network-name lan2
vyatta@vyatta# set service dhcp-server shared-network-name lan2 subnet 192.168.2.0/24
vyatta@vyatta# set service dhcp-server shared-network-name lan2 subnet 192.168.2.0/24 start 192.168.2.51 stop 192.168.2.200
vyatta@vyatta# set service dhcp-server shared-network-name lan2 subnet 192.168.2.0/24 default-router 192.168.2.1
vyatta@vyatta# set service dhcp-server shared-network-name lan2 subnet 192.168.2.0/24 dns-server 122.124.193.195
vyatta@vyatta# set service dhcp-server shared-network-name lan3
vyatta@vyatta# set service dhcp-server shared-network-name lan3 subnet 192.168.3.0/24
vyatta@vyatta# set service dhcp-server shared-network-name lan3 subnet 192.168.3.0/24 start 192.168.3.51 stop 192.168.3.200
vyatta@vyatta# set service dhcp-server shared-network-name lan3 subnet 192.168.3.0/24 default-router 192.168.3.1
vyatta@vyatta# set service dhcp-server shared-network-name lan3 subnet 192.168.3.0/24 dns-server 122.124.193.195
vyatta@vyatta# commit
vyatta@vyatta# set service webproxy listen-address 192.168.1.1
vyatta@vyatta# set service webproxy listen-address 192.168.2.1
vyatta@vyatta# set service webproxy listen-address 192.168.3.1
vyatta@vyatta# set service webproxy cache-size 2048
vyatta@vyatta# commit
vyatta@vyatta# save
Vyatta router V1:
vyatta@vyatta:~$ configure
vyatta@vyatta# set system name-server 122.124.193.195
vyatta@vyatta# commit
vyatta@vyatta# set interfaces ethernet eth0 address 122.124.193.196/27
vyatta@vyatta# set interfaces ethernet eth1 address 192.168.5.6/30
vyatta@vyatta# set interfaces ethernet eth2 address 116.98.176.210/29
vyatta@vyatta# commit
vyatta@vyatta# set service nat rule 10 type masquerade
vyatta@vyatta# set service nat rule 10 source address 192.168.0.0/16
vyatta@vyatta# set service nat rule 10 destination address 0.0.0.0/0
vyatta@vyatta# set service nat rule 10 outbound-interface eth0
vyatta@vyatta# set service nat rule 10 protocol all
vyatta@vyatta# set service nat rule 20 type masquerade
vyatta@vyatta# set service nat rule 20 source address 192.168.0.0/16
vyatta@vyatta# set service nat rule 20 destination address 0.0.0.0/0
vyatta@vyatta# set service nat rule 20 outbound-interface eth2
vyatta@vyatta# set service nat rule 20 protocol all
vyatta@vyatta# commit
vyatta@vyatta# set protocols static route 0.0.0.0/0 next-hop 122.124.193.193
vyatta@vyatta# set protocols static route 0.0.0.0/0 next-hop 116.98.176.209
vyatta@vyatta# set protocols static route 122.124.193.192/27 next-hop 122.124.193.193
vyatta@vyatta# commit
vyatta@vyatta# set service load-balancing wan interface-health eth0
vyatta@vyatta# set service load-balancing wan interface-health eth0 failure-count 5
vyatta@vyatta# set service load-balancing wan interface-health eth0 nexthop 122.124.193.193
vyatta@vyatta# set service load-balancing wan interface-health eth0 ping 216.204.61.104
vyatta@vyatta# set service load-balancing wan interface-health eth2
vyatta@vyatta# set service load-balancing wan interface-health eth2 failure-count 4
vyatta@vyatta# set service load-balancing wan interface-health eth2 nexthop 116.98.176.209
vyatta@vyatta# set service load-balancing wan interface-health eth2 ping 216.204.61.104
vyatta@vyatta# set service load-balancing wan rule 10
vyatta@vyatta# set service load-balancing wan rule 10 destination address 122.124.193.192/27
vyatta@vyatta# set service load-balancing wan rule 10 exclude
vyatta@vyatta# set service load-balancing wan rule 10 inbound-interface eth1
vyatta@vyatta# set service load-balancing wan rule 10 interface eth0 weight 2
vyatta@vyatta# set service load-balancing wan rule 10 interface eth2 weight 1
vyatta@vyatta# set service load-balancing wan rule 15
vyatta@vyatta# set service load-balancing wan rule 15 inbound-interface eth1
vyatta@vyatta# set service load-balancing wan rule 15 interface eth0 weight 2
vyatta@vyatta# set service load-balancing wan rule 15 interface eth2 weight 1
vyatta@vyatta# commit
vyatta@vyatta# set content-inspection traffic-filter preset all
vyatta@vyatta# set content-inspection ips actions priority-1 drop
vyatta@vyatta# set content-inspection ips auto-update oink-code
vyatta@vyatta# set content-inspection ips auto-update update-hour 23
vyatta@vyatta# commit
vyatta@vyatta# save
ini saja dulu...mudahan bermanfaat.
Copas From: http://hans.polinpdg.ac.id/index.php?option=com_content&view=article&id=58:vyatta-502-lan-routing-webproxy-nat-load-balancing-ips&catid=2:tutorial&Itemid=2
